Newsgroups: rec.radio.amateur.misc From: wa2ise@netcom.com (Robert Casey) Subject: DR130 MARS mod file Message-ID: Keywords: mods Organization: NETCOM On-line Communication Services (408 241-9760 guest) Date: Sun, 16 May 1993 20:10:03 GMT Lines: 21 copied from packet: Path: N6IIU!N6QMY!N6IYA!WA7SJN!WA7BHH!W7GCI!W7GCI!W0RA ... Here is the expanded TX mod for the Alinco DR-130: 1. Open the top of the case by removing the three screws. 2. Locate the blue loop of wire near the display, facing toward you. 3. cut the blue loop of wire, and tape up the ends. 4. replace cover of the radio. 5. reset the radio by holding the function key down and turning on the power. Here is also a cute little mod for the display: Insted of seeing frequency display (147.585 etc.) You can have it read out like a business band radio (CH-1) by holding the VFO/M/W key and turning on the power. -73- De Greg, N8PPZ =============================================================================== Note: I haven't tried or verified this, proceed at your own risk. WA2ISE ------------------------------------------------------------------------------- ex AT&T Bell Lab Member Techinal Staff, currently a Sprint customer! Copied from the QRZ! Windows Ham Radio CDROM